For expert photonics advice, get in touch with the Laser 2000 team.
Our experts are on-hand to help answer your questions and ensure you get the right solution for your application. To contact us, either send us an email, or give us a call to have a chat about your latest application.
For expert photonics advice, get in touch with the Laser 2000 team.
Our experts are on-hand to help answer your questions and ensure you get the right solution for your application. To contact us, either send us an email, or give us a call to have a chat about your latest application.
The C10000-801 TDI camera is useful for a wide range of imaging applications requiring high-speed operation with high sensitivity simultaneously. TDI is a special image acquisition method that has been used extensively in machine vision applications for industrial inspection. TDI imaging is appropriate for applications where it is desired to record a linear process over time, or where the aspect ratio of the subject being imaged is significantly asymmetric. TDI is particularly useful for low light level scanning applications for which a typical line scan camera can not make a useful image. Also, frame readout mode is available for easy focusing.
Features:
High resolution / high sensitivity (Horizontal spatial resolution with 128(V) TDI stages): 2048(H) × 128 (V), 4 TAP
Line rate up to 50 kHz
High speed imaging combined with high sensitivity and low noise
Great spectral response for UV-NIR with back-thinned CCD
100× anti-blooming with lateral overflow drain
Dynamic range of 1600:1
12 bit / 8 bit selectable A/D converter
Bidirectional scanning operation
Frame readout mode for easy focusing
Real time shading correction internal DSP
Principle of TDI Technology
Type number
C10000-801
Imaging device
Back thinned type
Effective number of pixels
2048 (H)×128 (V)
Cell size
12 μm (H)×12 μm (V)
Effective area
24.58 mm (H)×1.536 mm (V)
Readout mode
TDI readout mode / frame readout mode*1
TDI transfer direction
Bidirectional transfer
TDI output channel
4 TAP (512×128)
Anti-blooming
Yes (100 times of the full well capacity)
TDI pixel clock rate
30 MHz
TDI line rate
0.457 kHz to 50 kHz
TDI line rate control
Internal setting by serial command*2 / External trigger
Full well capacity
80 000 electrons (typ.)
Readout noise
50 electrons rms (typ.)
Dynamic range
66.66736111
Binning
2×2, 4×4
Analog gain
1 time to 5 times (16 steps)
A/D converter
12 bit/8 bit*3
Image processing
Real-time shading correction / Back ground subtraction
Interface
Camera Link base configuration
Camera control
Serial control in Camera Link
Camera output clock
60 MHz
Camera output channel
2 TAP (1024×128)
Connector
Mini-Camera Link (SDR)×1
Lens mount
F-mount
Power requirements
AC100 V to AC240 V, 50 Hz/60 Hz
Power consumption
Approx. 55 VA
Ambient operating temperature
0 ℃ to +40 ℃
Ambient storage temperature
-10 ℃ to +50 ℃
Ambient operating/storage humidity
90 % or less (with no condensation)
Ambient operating humidity
30 % to 70 % (with no condensation)
*1 Frame readout mode is useful for easy focusing, but it is not suitable for measurement. Please consult with our sales office for details.
*2 Internal TDI line rate is set by 33 ns step.
*3 Selectable by serial command.
If you’re interested in the products shown here, or have questions about something you can’t find on our website, please get in touch through the form below.
Our knowledgeable sales team will be happy to help. We can normally source exactly what you need, or work with you to come up with custom solutions.
Alternatively, just call +44 (0) 1933 461 666 and ask to speak to the Photonics team.
